Frost-proof Tap Valve FH32-2
Market price
Product Overview:
It has completely replaced traditional methods of frost protection, such as conventional wrapping, continuous water flow, and heating tapes.
Keywords:
Manual Tap Water Freeze-Proof Valve
- Product Description
-
- Name: Frost-proof Tap Valve FH32-2
It has completely replaced traditional methods of frost protection, such as conventional wrapping, continuous water flow, and heating tapes.
1. Completely replaced traditional methods of frost protection, such as conventional wrapping, continuous water flow, and heat-tracing cables.2. The product features clear labeling and is easy for both adults and children to operate—no professional installation required.3. The product is compact, takes up minimal space, is easy to install and maintain, and boasts a long service life.4. Even when the heating is turned off or during extended absences, the temperature won't drop below -40°C, preventing freezing.5. No need to modify the existing system—simply install it using standard connectors.6. No insulation layer required, no need for any power or fuel—saving on insulation costs.8. One valve for multiple uses—open to release water, close to prevent freezing—making it exceptionally convenient to use.
(1) Normal Water Supply: Ensure the faucet is turned off, then rotate the handle of this product in the direction indicated by the arrow until it stops—this completes the water supply. Use the faucet's switch to dispense water.(2) Drain and Prevent Freezing: When low temperatures that may cause freezing are expected, turn the handle of this product in the drainage direction indicated by the arrow until it stops rotating. Then, fully open all faucets controlled by this product to ensure all water has been drained completely before closing the faucets again.
1. Be sure to remove dust and foreign particles from this product and the connecting pipes before installation.2. Ensure that the horizontal piping extending from this product has an upward slope of at least 1 in 100.3. When installing inside the inspection well, be sure to leave a 200mm drainage space below the product's outlet. This space can be filled with a dedicated drainage mesh or gravel to facilitate water seepage.4. Avoid rough handling, and strictly prohibit heating or exposing this product to direct sunlight. Also, never use this product in non-cold-water plumbing systems.5. Be sure to determine the water inlet direction during installation, following the arrow indicated on the main body of this product.6. Be sure to install this product below the frost line. When installing above ground, make sure the pipeline immediately preceding the product remains unfrozen—no insulation is required for the section after the product.7. When low temperatures or freezing conditions are expected, fully drain the water by turning the handle in the direction indicated by the drainage arrow on this product. At the same time, open all faucets within the product’s control range to allow any remaining water to flow out completely before closing them again. Whether using water or antifreeze, always turn the handwheel all the way to the stop—never leave it halfway.8. It is recommended to install an anti-backflow drain valve (odor trap) at the drainage outlet of the freeze-proof valve to prevent sewage or foul odors from backing up and contaminating the pipes.9. It is recommended to install a main valve before the freeze-proof valve, making it easier to maintain, repair, or clean and replace the freeze-proof valve components.- 自来水防冻阀 FH32-2
Intent Consultation
Related News
2024-03-20
Recently, the Shandong Provincial Association for Science and Technology announced the results of the 7th Shandong Science and Technology Workers' Innovation Competition. Organized by the Shandong Provincial Association for Science and Technology and hosted by the Shandong Provincial Institute of Electronics, the Jinan City Association for Science and Technology, and the Inspur Innovation Center, the event saw participation from candidates recommended by the Weifang City Association for Science and Technology. After rigorous evaluation stages—including an initial review by a panel of experts, a re-review, a live final round, and public announcement—the project "Research and Application of Anti-Freezing Technology for Drainage Pipes Along Railway Sidewalls in Cold Regions," independently developed by Shandong Sanhuali Machinery Technology Co., Ltd., was awarded second prize in the competition.
2024-03-20
The conference on building a province strong in advanced manufacturing was held in Jinan. Among the attendees, Shandong Sanhuali Machinery Technology Co., Ltd.'s "3FT Multi-Functional Fire Hydrant" and two other company products were approved this year as the province's first (set of) major technological equipment and core components, ranking among the highest in Weifang city.
Phone:+86-536-8536300
Service Hotline:400-658-6799
Address: China, Shandong, Weifang High-tech Zone
Email:sanhuali2011@163.com
Website:www.shlvalve.com
- WeChat -
- TikTok -